ULTRA FIX DEBBEX (50g + 200ml)
Code: 1003
Fast Dilivery
Order and pay by 10 AM via DPD for next-day delivery!
Related products
Product detailed description
📊 Technical Parameters
System Type: 2-Component (CA Gel + Activator Spray)
Initial Fixation: 3–5 seconds
Packaging: 50 g Gel Glue + 200 ml Activator
Consistency: Thixotropic Gel (Non-Drip)
Substrates: MDF, Wood, Stone, Ceramics, Plastics, Rubber
Product Code: DEB-ULTRAFIX
💡 Why I picked this for the e-shop?
On a real job site, you don't have 20 minutes to wait for glue to dry while holding a mitered tile edge or trim in place by hand. Cheap superglues from DIY retail stores are way too runny, soak right into porous tiles, and snap off under load. Ultra Fix in a thixotropic gel form paired with an activator spray is what we personally use at J&J Tile Design for instant fixation of baseboards, natural stone, and decorative trims – spray, press, and in 3 seconds it holds like a rock.
🛠️ Professional Pro-TIP for Installation: Spray the activator onto one side of the joint and let it air off for a couple of seconds. Apply the gel glue to the other side. The instant the two pieces touch, bonding occurs immediately – align your pieces carefully before bringing them together!
🔍 Expert Insight: We use Ultra Fix as an "extra hand" when bonding with heavy structural epoxies (like Tenax ELIOX). While the primary structural epoxy cures, Ultra Fix locks the corners and profiles rigidly in place without needing clamps or masking tape.
✅ Key Benefits
- Extremely fast curing time within 3–5 seconds.
- Thick gel formula – will not run or drip down vertical surfaces.
- High adhesion to wood, natural stone, porcelain, ceramic, and plastics.
⚠️ What to watch out for
- Instant cure leaves no time for subsequent repositioning.
- Does not replace full-surface flexible expansion adhesives outdoors.
- Always spray the activator in well-ventilated work areas.
Job-Site FAQ
How is the glue and activator applied?
Spray the activator onto one surface from a distance of ~15–20 cm and let it flash off. Apply gel glue to the second surface. Press both parts together immediately for 3 to 5 seconds.
Will the activator leave marks on glazed tiles or stone?
The activator spray evaporates completely without leaving oily residues. For sensitive or highly porous natural stones, we recommend a quick test on an offcut.
Can it bond non-porous materials like plastics or rubber?
Yes, the 2-component system works universally on rigid plastics, PVC, rubber, metal, ceramics, and wood.
Additional parameters
| Category: | Adhesives, Sealants, Chemicals |
|---|---|
| Warranty: | 2 years (Company 1 year) |
| Weight: | 0.3 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!