MAMUT GLUE High Tack bílý (290 ml)
Code: 1141
Fast Dilivery
Order and pay by 10 AM via DPD for next-day delivery!
Related products
Product detailed description
📊 Technical Specifications
Base: MS Polymer (silane-modified polymer)
Color: White
Packaging: 290 ml (cartridge)
Instant Grab: 500 kg/m² (50 g/cm²)
Final Tensile Strength: 2.2 MPa (22 kg/cm²)
Temperature Resistance: -40 °C to +95 °C
Application Temperature: +5 °C to +40 °C
Product Code: MAMUT-HT-290
💡 Why choose this exact solution?
Hey tilers. We all know those cheap assembly mastics and "liquid nails" from the DIY store: you run a bead on a ceramic baseboard or heavy profile, push it against the wall, and the piece starts slowly drifting downward. You spend half an hour taping it with masking tape, wedging tile offcuts underneath, and praying it doesn't pop off before morning. White Mamut High Tack in the 290 ml cartridge is pure reliability. It has such aggressive initial suction that you just press the workpiece home once and it stays exactly where you want it. No sliding, no propping, and no wasted time on site.
🛠️ Professional installation TIP: Use the supplied nozzle with its factory V-notch and hold the caulking gun perpendicular to the gluing surface. Apply strictly in vertical stripes spaced 10–15 cm apart. Never form closed loops or horizontal dam lines. MS polymer cures through ambient air humidity—ventilation guarantees full-depth cure and allows the bond to develop its full 22 kg/cm² capacity.
🔍 Expert perspective (Tested at J&J Tile Design): White Mamut High Tack in the 290 ml cartridge is our primary go-to adhesive for mounting tile skirting, securing backing blocks behind wall-hung toilets, fixing edge trims, and setting concealed inspection and ventilation frames. Because the paste is dense, use a high-ratio professional caulking gun (such as 18:1 or 25:1). Wear Wussow black nitrile gloves to keep hands clean, and clean off squeeze-out from finished faces immediately using UltraGrime wipes.
✅ Key Advantages
- Instant 500 kg/m² grab removes the need for clamps, tape, or temporary wedges.
- Final tensile strength up to 22 kg/cm² once fully cured.
- High adhesion to porous and non-porous surfaces, including slightly damp concrete and tile.
⚠️ What to watch out for
- Not compatible with PE, PP, PTFE (Teflon), or bituminous surfaces.
- Thick consistency requires a sturdy, high-thrust professional caulking gun.
- Remove excess adhesive immediately while wet; cured material can only be cut away mechanically.
Practical FAQs
Will heavy wall tiles or mirrors really stay put without sliding down?
Yes. Its instant grab of 500 kg/m² (50 g/cm²) locks tile pieces, skirting, and mirror panels directly onto vertical walls upon firm, even contact without slipping.
Can MAMUT GLUE High Tack be used for mirror installation?
Yes, it is designed for mirror bonding. It is chemically neutral and completely free from solvents and aggressive acids, so it will not damage the reflective silver backing.
What kind of caulking gun should I use for this cartridge?
Due to the high viscosity of the compound, we recommend a heavy-duty applicator gun with a mechanical advantage of at least 18:1 or 25:1. Lightweight hobby skeleton guns can bend under extrusion pressure.
Additional parameters
| Category: | Adhesives, Sealants, Chemicals |
|---|---|
| Warranty: | 2 years (Company 1 year) |
| Weight: | 0.4 kg |
| EAN: | 8595100116659 |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!