Kotouč Butterfly na dlažby do 12 mm pro proxxon LWB (tloušťka 0,6mm)
Code: 997/SE 997/BEZ Choose variant
Fast Dilivery
Order and pay by 10 AM via DPD for next-day delivery!
Related products
Product detailed description
📊 Technical Parameters
Blade Diameter: 50 mm
Segment Thickness: 0.8 mm
Bore / Mounting: 5.8 mm (optional 3.2 mm shank mandrel)
Cooling Mode: Wet cutting only (water required)
Recommended Speed: approx. 10,000 RPM
Tool Compatibility: Proxxon LWB/LWH, Dremel, micro grinders
Suitable Materials: Porcelain stoneware, hard ceramics, tiles, glass
Product Code: DIS11120159105 / DIS11120159106
💡 Why Choose This Solution?
Hey tilers! Cutting openings for flush buttons or sockets on a 120x280 cm slab with a large angle grinder blade is nerve-wracking. The DISTAR ButtonCut 50 mm was engineered specifically for this delicate work. With a thickness of only 0.8 mm, it glides through hard porcelain stoneware with minimal friction, creating zero internal tension and leaving edges so clean you won't need follow-up grinding pads.
🛠️ Professional Installation TIP: Always cut with continuous water cooling! Even brief dry cuts heat up the thin 0.8 mm body, causing blade warping and immediate glaze chipping. Keep your rotary tool speed dialed down to 10,000 RPM for a smooth, controlled feed.
🔍 Expert Insight: At J&J Tile Design, this blade is an absolute staple when preparing tile inserts for our hidden flush button series (Geberit, TECE, Alcaplast). Combined with a Proxxon LWB angle rotary tool, it forms a setup that saves hours of frustration on fine cuts.
✅ Key Benefits
- Ultra-thin 0.8 mm Kerf – joints look sleek, crisp, and exact.
- Eliminates Grinding – fine diamond matrix protects tile glaze from chipping.
- Tailored for Microtools – 50 mm compact size avoids overloading tool spindles.
⚠️ Points to Keep in Mind
- Requires Water Cooling – never operate dry.
- Control RPM – do not exceed approx. 10,000 RPM.
- Avoid Heavy Pressure – let the fine diamond grain cut naturally.
Field Questions (FAQ)
Can I use the ButtonCut blade for dry cutting?
No. The blade is only 0.8 mm thick; without water cooling, it will overheat, warp, and chip the glaze within seconds.
What speed setting should I use on a Proxxon or Dremel tool?
The recommended speed is around 10,000 RPM. Higher RPMs increase tool vibration and risk micro-chipping delicate tile edges.
Should I buy the standalone blade or the shank mandrel version?
If you already have a 5.8 mm arbor mandrel for micro tools, the standalone blade is sufficient. If you mount directly into a 3.2 mm collet or chuck, choose the version with the shank mandrel.
Additional parameters
| Category: | TOOLS FOR TILERS |
|---|---|
| Warranty: | 2 years (Company 1 year) |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!