DISTAR Diamond Wire CordSET 0.5 mm (5 pcs)
Code: 1012
Fast Dilivery
Order and pay by 10 AM via DPD for next-day delivery!
Related products
Product detailed description
📊 Technical Parameters
Wire thickness: 0.5 mm
Package quantity: 5 pcs
Compatibility: DISTAR CordSET / Proxxon / Dremel
Material: Steel wire with diamond coating
Suitable for: Porcelain stoneware, ceramics, glass, marble
Product code: 87015424118
💡 Why choose this solution?
When cutting custom cutouts or inside corners in tiles, there is zero room for error. If you use an angle grinder with a 125 mm blade, you'll over-cut the line or create internal tension, causing an expensive tile to snap. DISTAR CordSET wires remove only 0.5 mm of material, leaving no stress in the tile and producing a razor-clean cutout.
🛠️ Professional Installation TIP: Before starting an internal cut, drill a small hole in the corner with a diamond drill bit (3–6 mm). Thread the wire through the hole and then clamp it into the CordSET frame. This gives you a clean start without the wire slipping across glazed surfaces.
🔍 Expert Insight: Tested at J&J Tile Design. CordSET wires are indispensable on jobs where the client demands invisible details. To clean up and smooth the internal edge after cutting, I recommend combining this with our Proxxon diamond burrs or a Montolit DF120 diamond hand pad.
✅ Key Benefits
- Ultra-thin cut (0.5 mm) with zero material tension or cracking risk.
- Clean edges without chipping glaze, even on hard porcelain stoneware.
- Allows cutting shapes and small radii impossible with a standard grinding disc.
⚠️ Things to watch out for
- Requires a gentle touch – excessive pressure will snap the wire.
- Not intended for long straight cuts (use a diamond blade for those).
- Wire must be clamped tightly in the frame to prevent skewed cuts.
Practical FAQ
How long does one diamond wire last?
It depends on material hardness and feed pressure. With proper technique and no twisting, a single wire handles several complex cutouts in 10 mm porcelain tiles.
Can the wire be used without the CordSET frame?
The wire requires firm tension for straight cuts. The CordSET frame or an equivalent holder provides correct tension and ergonomics; without it, the wire will break quickly.
Is water cooling required while cutting?
The wire is engineered for dry cutting, but light water dampening reduces dust and significantly prolongs the diamond grit life.
What drill bit diameter should I use for a starter hole?
We recommend a diamond drill bit ranging from 3 mm to 6 mm to easily pass the 0.5 mm wire through.
Additional parameters
| Category: | TOOLS FOR TILERS |
|---|---|
| Warranty: | 2 years (Company 1 year) |
| Weight: | 0.2 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!